Solid State Logic Matrix 2 Owner's Manual page 16

Chapter 1 - Setup
Network Connection Configuration (Mac)
System Preferences
‰ On the Mac, go to
‰ Set Configure IPv4
here:
‰ Ensure that Matrix is set to use DHCP: Use the
soft key on the console, go to the
SSL
and make sure that
Page 44).
Network Connection Configuration (Windows)
‰ Go to Network and go into
‰ Open up the option Internet Protocol Version 4
‰ Choose the option
illustrated here:
‰ Ensure that Matrix is set to use DHCP: Use the
console, go to the
IP
Page 44).
3 Connection in a facility that has multiple SSL consoles
If you are in a studio that has multiple SSL consoles, we recommend that you purchase one of our 'LAN integration network
switches' from the SSL webstore. Due to the nature of UDP, if you have two SSL consoles on the same network with a normal
router/switch setup, then you may find that the console in one room will start to control another. Our managed switch blocks
UDP data on two of the ports, solving the problem and allows uplinking in a multi-room facility. Please visit the following link
for more details and a picture example:
Matrix 2 Owner's Manual
8
and click on the
to Using DHCP as shown
menu
IP
is selected (see
DHCP
Local Area Connection
Obtain an IP address automatically
menu and make sure that
store.solidstatelogic.com/catalog/36
Network
icon.
Properties.
(TCP/IPv4).
as
soft key on the
SSL
is selected (see
DHCP