Deleting A Title - Solid State Logic Matrix 2 Owner's Manual

Chapter 4 - Matrix Remote
Renaming a Title
To name a Title, select the Title which you wish to rename, and make it the Current Title. You can now edit Title name and other
details in the Notes area in the right hand side of the window. Once you have finished, press Save Notes (located below the
Title area) to save your changes.
Pressing Undo will bring up a pop-up warning that you will lose unsaved changes if you continue. Click Yes to revert the text
to its last saved state.
Right click (Mac: ctrl+click) on the folder and select Rename from the drop-down menu. This will produce the New Name
pop-up. Type the Title name, and click OK.
Duplicating and Copying a Title
To duplicate a Title, right-click (Mac: ctrl+click) on the Title folder and choose Duplicate. A duplicate of the Title, including
the Title Notes (see next page), Insert matrix and Total Recall folders and Channel Names folder, will appear at the bottom of
the same Project folder, with a bracketed number e.g. (1) appended to the Title Name indicating it is a duplicate. Subsequent
duplicates will incrementally increase the bracketed number.
To copy a Title to a different Project simply drag the Title into the destination Project folder and click OK in the Confirm Copy
pop-up. Alternatively, right-click (Mac: ctrl+click) on the Title folder and choose Copy to clipboard. Right-click on the
destination Project folder and choose Paste from clipboard.

Deleting a Title

To delete a title, right-click (Mac: ctrl+click) on the Title folder and select Delete from the drop-down menu. Click OK in the
Confirm Delete pop-up to delete the title.
Please be aware that this action cannot be undone.
Matrix 2 Owner's Manual
58