Matrix Remote Configuration - Solid State Logic Matrix 2 Owner's Manual

Chapter 1 - Setup

Matrix Remote Configuration

‰ Having completed the set-up guidelines described above, run the Matrix Remote software.
In the bottom left-hand corner of the Remote window there is a Find (
status of the connection to Matrix:
When the Matrix Remote first opens, it searches for a Matrix console to control. If it finds one, it will automatically link to that
console. This will be indicated by the
SN XXXX' message, where
If the Remote cannot find any Matrix consoles, its status will display the message
‰ If this happens, check your connections and press
Find Matrix pop-up.
‰ If the Remote still cannot find any Matrix consoles, the list in the pop-up
will be empty. In this case, recheck the connections and press the
Matrix button in the top right of the pop-up, and the Remote will rescan
for consoles.
‰ Once the Remote has found the console, it will appear in the pop-up.
Highlight the Matrix ID and then click on Select.
Once a connection has been made to Matrix, the green
Status field:
Matrix 2 Owner's Manual
10
Status to the right of the
SN XXXX is the ID of the Matrix console found.
) button, along with indication regarding the current
button displaying a green
to bring up the
Find
'Matrix Connected - Matrix SN
'Matrix Connected - Matrix
'No Matrix Found, click on
XXXX' message will appear in the
Find.'