Managing Titles - Solid State Logic Matrix 2 Owner's Manual

Managing Titles

Creating a Title
To create a new Title, simply press the
appear. This will create a new Title in the currently selected Project.
To create a new Title in a different Project, first open another Title in the desired Project using
Open Title, then click New
New Title
The pop-up Window will prompt you for the following:
Title Name – Name your New Title
Channel Names – Allows you to choose between the following:
Insert Matrix – Allows you to choose between the following:
Opening a Current Title
When Matrix is turned on, it will automatically open the last loaded Title. To load a different Title onto Matrix (and therefore
into the rest of the Remote), highlight the required Title folder and press the
screen. Alternatively, right-click (Mac: ctrl+click) on the Title folder and choose
appears.
The Current Title and its Project is displayed in the right hand side of the
Remote. It is also displayed in the soft key area of the console, when the SSL set is selected without any menus active.
Once the Title is loaded, the Matrix console will assume the channel names and insert routing within the Title. You can now also
edit session notes, and recall the Title's Total Recall snapshots, as described in the rest of this chapter.
Note: Loading a song into the Remote does not automatically recall a Total Recall snapshot onto the Matrix control surface.
See Page 61 for details of how to recall a snapshot.
New Title button and a new Title pop-up window will
Title.
> Last Used - Imports the same analogue channel names as used in the currently selected Title.
> Default - Names the channels in consecutive order 'Chan1', 'Chan2' etc.
> List of Presets - Underneath the options for
any saved Channel Name presets you have created using the
option in the Channels page of the browser. See later in this chapter for more information on this.
> Last Used - Imports the same Insert Matrix as the currently selected Title. The devices will be
inserted in the same positions.
> Default - Returns all devices to be available in the right-hand list.
> List of Presets - Underneath the options for
any saved Insert Matrix presets you have created using the
in the Insert Matrix page of the browser. See later in this Chapter for more information on this.
Chapter 4 - Matrix Remote
Last Used and Default, you will see a list of
Save Channel Names as Preset
Last Used and Default, you will see a list of
Save Insert Matrix as Preset
Open Title button located at the bottom of the
Open Title from the drop-down menu which
Projects tab, as well as in the top and bottom of the
Matrix 2 Owner's Manual
option
57