Ip Soft Keys; Misc Soft Keys - Solid State Logic Matrix 2 Owner's Manual

IP Soft Keys

The soft keys allow you to switch the console's IP address between
IP
The IP address information is shown after the
subnet mask set to 255.255.255.0.
See Page 5 for a description of how to change the fixed IP address.
See Page 4 for details of configuring the console's Ethernet connectivity.

Misc Soft Keys

The soft keys cover miscellaneous Matrix settings:
Misc
configures the channel
InpCu
any pre-fader feeds from the channel unaffected. Pressing
muting any feeds from the channel that are not sourced from the INPUT.
switches between the two digital inputs. By default, the AES (XLR) input is selected. Pressing the
OptDAC
selects the S/PDIF input, and the button lights to indicate that this input has been selected.
Fader Options:
rescales the master fader. By default, the master fader reaches 0dB at the top, following the scaling labelled on the
Mst+10
left of the fader. Pressing
of the fader.
and move the analogue faders on any channels selected using the upper
0dB Off
Meter Signal Scale Option:
The default scale for all of the LED meters is meters is 0dBfs corresponds to an analogue level of +24dBu. The
provides an alternative scaling of +18dBu.
USB Keyboard Identifier:
The key is used to identify the nationality of keyboard being emulated by the Matrix USB soft keys. See Page 100 for
KeybID
details.
DHCP
CUT buttons. By default, pressing the channel
switches the meter's scaling to reach +10dB at the top, following the labelling on the right
Mst+10
Fixed
button. By default, Matrix uses a fixed IP address of 192.168.1.2. with the
causes the CUT
InpCu
Chapter 3 - Analogue Signal Flow
and .
DHCP
CUT button mutes the channel output, leaving
buttons to mute the channel after the input,
SEL key to 0dB and –
Matrix 2 Owner's Manual
button
OptDAC
respectively.
∞
button
+18dB
47