Step 6; Channel Control Of Your Daw - Solid State Logic Matrix 2 Owner's Manual

Chapter 2 - Getting Started

STEP 6:

In this step we will turn our attention to control of the DAW track.
‰ Still on the Matrix console, press the
the channel fader. You will notice that the
button will light. Press the
‰ Press the
notice that the
CUT
Notice that the
selected in the DAW.
‰ Press the SOLO button again to deactivate it.
‰ Move the fader at the bottom of the Matrix channel. You will notice that the DAW's 4 5
‰ Find the SEL KEY area of the centre section, located below the
SELECT buttons. These buttons define the function of the lower
which is concerned with DAW control.
Note that the SEL KEY
10
14 15
‰ Ensure that all the SEL KEY
press them to return to default mode.
5
0
In default mode, the lower
5
‰ Press the SEL key in the channel controlling the
DAW.
10
10
‰ Press the left hand
20
5
again. You will notice that this time you have record-armed the
30
0
See Chapter 5 for details of other in-channel DAW control functions.
5
40
10
50
20
30
40
50
Matrix 2 Owner's Manual
22

Channel Control of your DAW

SOLO button in the channel controlling the
Test track will solo in the DAW. On Matrix, the channel
buttons in all the other channels will flash.
SOLO LED below the monitoring section is flashing, indicating that there is a solo button
6 7
modes have nothing to do with the upper, analogue
10 10
16
buttons are unlit, indicating that the lower
5 5
0 0
SEL keys function as DAW track selectors:
5 5
10 10
10 10
SEL KEY button marked
20 20
5 5
30 30
0 0
5 5
40 40
10 10
50 50
20 20
30 30
40 40
50 50
CUT button in the channel controlling the
Test track will cut in the DAW. On Matrix, the channel
CUT button again to deactivate it.
8
DAW LAYER
10 10
MASTER/FOCUS
5 5
0 0
5 5
Test track. You will notice that you have selected the
10 10
0 10
REC ARM and press the
20 20
5 5
Test
30 30
10 0
5
15
40 40
20 10
50 50
30 20
40 30
50 40
60 50
i
n
Mon
Projec
Test track, located below the
SOLO
9 Test track fader is moving.
SEL key
SEL key.
10
SEL keys are in default mode. If any buttons are lit,
5
0
5
10
SEL key in the channel controlling the
20
track in the DAW. Leave the track record-readied.
30
40
50
62
Test track, located above
Me e t rs Auto
CUT
t 2 :: T itle
CUT button. You will
button will light and the
10 11
10
5
0
5
Test track in the
10
Test track
20
30
40
50
2
TR
12
10
5
0
5
10
20
30
40
50