Matrix Owner's Manual; Chapter 4 - The Matrix Remote; Introduction To The Matrix Remote - Solid State Logic Matrix 2 Owner's Manual

Chapter 4 – The Matrix Remote
In this chapter, we will examine how the Matrix configuration and session information can be controlled and managed in the Matrix
Remote.
For details of installing the Matrix Remote software, see Chapter 1.

Introduction to the Matrix Remote

There are six tabs in the Remote window:
- Projects is where you select the current Project and Title, and where you administrate the data related to specific
Projects and Titles, including the data held within the
- Total Recall manages the storing and recalling of console settings.
- Channels allows you to label the console's analogue channels.
- Insert Matrix controls the routing of channel inserts.
- DAW configures the protocol used to link Matrix with your DAW, along with its soft key assignments.
- About displays the Matrix console and Remote software versions currently installed, and contains useful short cuts to the
SSL website for product support, FAQs, registration and downloads.
This chapter deals with those tabs which are concerned with session-specific data, namely the Projects,
and Insert Matrix tabs. The
examined in Chapter 5. The
Note that the Matrix configuration data controlled from the Remote is stored on the SD card in the back of the Matrix console
(see Page 2), not on the computer hosting the Remote.
DAW tab is related to the basic configuration of Matrix rather than to specific sessions, and is
About tab requires no further explanation.
Total Recall, Channels
Matrix
Chapter 4 - Matrix Remote
and Insert Matrix tabs.
Total Recall,
2 Owner's Manual
Channels
53