Assigning Daw Protocol Functions - Solid State Logic Matrix 2 Owner's Manual

Chapter 6 - DAW and CC Configuration
Programming Soft Keys
Soft keys are programmed from the
Across the middle of the
of soft keys is present in the lower part of the window for editing. The five normal soft key sets,
4, are all edited in exactly the same way within the
be dealt with on Page 103.
Below this row of buttons is a representation of the soft keys section of the Matrix control surface called
showing the 16 buttons and the central display, with current assignments indicated in the display. Six dashes in the display indicate
that the button is currently unassigned within this soft key set.
In the left-hand top corner of the
top corner are the Show Sub Keys
or not there are unsaved changes within the present soft key set. Assignments must be saved using the
in order for them to become active on the Matrix control surface. Unsaved changes can also be cancelled using the
Switching between soft key sets will lose any unsaved changes, and a pop-up window will appear, offering the option of
continue or Cancel the set switch.
Soft key assignments only appear in the Matrix soft keys once they have been saved.
Matrix 2 Owner's Manual
100
DAW tab in the Matrix Remote:
DAW tab's window is a row of radio buttons marked
Soft Key Setup
box (see Page 101) and saved data
DAW tab. The Transport/Utility
area are the Save, Save As
Status
Soft Key Set. These buttons select which set
Standard
set functions slightly differently and will
and Undo buttons, and towards the right-hand
indicator. The Status indicator shows whether
Save
and User 1 to User
Soft Key Setup,
or Save As button
Undo button.
Save and