Editing Transport And Utility Button Assignments - Solid State Logic Matrix 2 Owner's Manual

Editing Transport and Utility Button Assignments

In addition to the main 16 soft keys, the function of 18 other buttons and the two foot switch inputs can be edited, increasing
the total number of assignable soft keys within the four layers to 380. This is likely to be useful if you are using DAW packages
which do not have suitable equivalents for certain functions used in the Pro Tools, Logic or Nuendo/Cubase Profiles. It may also
be that the way you work means that there are some controls which you never use and other functions which would be more
usefully accessed from those buttons.
The 18 buttons which are editable in this way are:
- The ten buttons above the main transport controls, the top left of which is labelled PREVIOUS,
- The six right-most utility buttons located above them, the top left of which is labelled SHIFT,
- The SAVE and UNDO
Note: The functions assigned to these buttons in the standard Profiles are described on Pages 79 and 80.
To edit these button assignments, press the
in the DAW tab, bringing up a representational display of these buttons:
The buttons in the tab are distinguished by the Matrix console labels above each button. The current button assignments are
indicated below each button. If the button is currently unassigned, the label below the button will consist of six dashes.
These buttons are assigned in exactly the same way as the normal soft keys.
Note that Transport and Utility keys cannot be assigned to be Menu selectors.
buttons located above and to the right of the main soft key area.
Transport/Utility
Chapter 6 - DAW and CC Configuration
radio button at the right-hand end of the
Matrix
Soft Key Set
2 Owner's Manual
row
105