Label Id; Label Id: Pre-Loaded Sets - Datalogic Gryphon I GD4100 Reference Manual

Label ID

A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following
the transmitted barcode data depending upon how this option is enabled. This feature provides
options for configuring custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets"
below) or individually per symbology (see "Label ID: Set Individually Per Symbology"on
page 137). If you wish to program the reader to always include an industry standard label
identifier for ALL symbology types, see the previous feature "Global AIM ID"on page 132.

Label ID: Pre-loaded Sets

The reader supports two pre-loaded sets of Label IDs. Table 17 shows the USA set and the EU
set.
CAUTION
DEFAULT
Label ID Pre-loaded Set = EU Set
Table 17. Label ID Pre-loaded Sets
ABC Codabar
Anker Plessey
CODABAR
Product Reference Guide
When changing from one Label ID set to another, all other reader
configuration settings, including the host interface type, will be
erased and set to the standard factory defaults. Any custom config-
uration or custom defaults will be lost.
ENTER/EXIT PROGRAMMING MODE
Symbology
Label ID Pre-loaded Set = USA Set
USA Label ID set
ASCII Hexidecimal
character value
S 530000
o 6F0000
% 250000
Label ID
EU Label ID set
ASCII Hexidecimal
character value
S 530000
o 6F0000
R 520000
135