Sleep Mode Timeout - Datalogic Gryphon I GD4100 Reference Manual

Sleep Mode Timeout

Specifies the timeout value for the reader to enter low power Sleep Mode. When Sleep Mode is
enabled the reader cannot receive commands from the Host or base station.
In order for the reader to enter Sleep Mode, the following conditions must be met:
Corded version .
Mobile version . Sleep state is allowed only on the handheld (not on the base) when trigger
single, trigger multiple or trigger pulse are set, and when the reader is not charging the battery.
Sleep Mode Timeout = Disable
$
Sleep Mode Timeout = 2 Seconds
$
Sleep Mode Timeout = 4 Seconds
Product Reference Guide
RS-232 interface and trigger single, trigger multiple or trigger pulse.
ENTER/EXIT PROGRAMMING MODE
Sleep Mode Timeout
DEFAULT
Sleep Mode Timeout = 1 Second
Sleep Mode Timeout = 3 Seconds
37