Display Mode - Datalogic Gryphon I GD4100 Reference Manual

General Features

Display Mode

The user can control the reader display behavior according to the following selections:
Local Echo mode: When a barcode is read with the reader:
•
•
•
•
Normal mode: When a barcode is read with the reader:
•
•
•
Clear Display After Decode mode: When a barcode is read with the reader:
•
•
•
Host messages sent to the reader are always written to the reader display.
DEFAULT
Normal mode
62
The code is sent to the Host.
The reader display is cleared.
The code is also sent to the reader display (Local Echo).
The cursor is positioned after the last printed character on the reader display.
The code is sent to the Host.
The reader display is not cleared. Therefore if any previous data was displayed on the
reader screen it remains.
There is no Local Echo to the reader display.
The code is sent to the Host.
The reader display is cleared. Therefore if any previous data was displayed on the reader
screen it is cancelled and the screen remains blank.
There is no Local Echo of the code to the reader display.
ENTER/EXIT PROGRAMMING MODE
$
Local Echo mode
Clear display after decode
Gryphon™ I GD4100/GM4100