USB-OEM Interface
USB-OEM Device Usage
The USB-OEM protocol allows for the reader to be identified as one of two different types of
barcode scanners. Depending on what other scanners you may already have connected to a
USB-OEM POS, you may need to change this setting to enable all devices to communicate.
Options are:
USB-OEM Device Usage = Handheld Scanner
114
• Table Top Scanner
• Handheld Scanner
It may be necessary to switch device usage when connecting
two readers/scanners of the same type to a POS system.
NOTE
ENTER/EXIT PROGRAMMING MODE
USB-OEM Device Usage = Table Top Scanner
DEFAULT
Gryphon™ I GD4100/GM4100