Getting Started; About The Reader; Unpacking; Setting Up The Reader - Datalogic Gryphon I GD4100 Reference Manual

About the Reader

Advancements in the LED technology used in this reader significantly improve the illumination
of the target field of view, resulting in higher scan efficiency. Whether used in Single Trigger or
Continuous Mode, the ergonomic design of the reader will help to promote comfortable
handling during extended periods of use.
See "Interface Selection"on page
model type.

Unpacking

Check carefully to ensure the reader and any accessories ordered are present and undamaged. If
any damage occurred during shipment, contact Datalogic Technical Support. Information is
shown on page 9.
KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its
original shipping container.

Setting Up the Reader

Depending on whether you are using a Corded or Mobile version of the Gryphon,
steps provided in this section to connect and get your reader up and communicating with its
host.
1. Install the Batteries
2.
3.
4.
5.
P r o d u c t R e f e r e n c e G u id e
Install the Interface Cable
Select the Interface Type
Configure Interface Settings
Configure Other Features

Getting Started

67 for a listing and descriptions of available interface sets by
(Corded) or Connect the Base Station (Mobile)
(only if not using factory settings for that interface)
(if modifications are needed from factory settings)
Chapter 2
follow the
13