Rs-232 Only Interface; Introduction; Rs-232 Standard Factory Settings; Baud Rate - Datalogic Gryphon I GD4100 Reference Manual

Introduction

Use the programming barcodes in this chapter if modifications to the standard RS-232 interface
settings are necessary to meet your system's requirements. Additional settings which apply to
both the RS-232 and USB interfaces are available in

RS-232 Standard Factory Settings

Reference

Baud Rate

Baud rate is the number of bits of data transmitted per second. Set the reader's baud rate to
match the baud rate setting of the host device. With an improper baud rate setting, data may
not reach the host correctly.
Baud Rate = 2400
Product Reference Guide
Appendix C, Standard Defaults
ENTER/EXIT PROGRAMMING MODE

RS-232 ONLY Interface

Chapter 6, RS-232/USB-Com
for a listing of standard factory settings.
Baud Rate = 1200
Baud Rate = 4800
Chapter 5
Interfaces.
73