Datalogic Gryphon I GD4100 Reference Manual page 141

STEP ACTION
Scan the ENTER/EXIT
1.
barcode
Determine placement of
the Label ID characters
BEFORE or AFTER with
2.
regard to scanned data
using Label ID
Control, starting on page 140
Scan the barcode selecting
the symbology type you
wish to designate label ID
3.
characters for using Label
ID Symbology
Selection, starting on page 141.
Custom Label ID example
4.
(desired characters):
Find hex equivalents from
the ASCII table (inside back
cover), then scan in these
digits/characters using the
barcodes in the section:
Keypad, starting on page 407.
5.
If you make a mistake
before the last character,
scan the CANCEL barcode
to abort and not save the
entry string. You can then
start again at the
beginning.
Result:
Product Reference Guide
(Scanner enters Programming Mode)
Enable as Prefix Enable as Suffix Enable as Prefix
DataBar
Code 39
Omnidirectional
D B * = C 3
44 42 2A 3D 43 33
DB*[barcode [barcode
data] data]=C3
EXAMPLES
Enable as Suffix
Interleaved 2 of
5
+
2B
+[barcode data] [barcode data]PH
Label ID
Code 32
P H
50 48
139