Scanning Features; Scan Mode - Datalogic Gryphon I GD4100 Reference Manual

Scanning Features

Scan Mode

Selects the scan operating mode for the reader. Selections are:
Trigger Single.
occurs:
- Scanning Active Time has elapsed
- a label has been read
- the trigger is released
This mode is associated with typical handheld reader operation: when the trigger is pulled,
scanning starts and the product scans until the trigger is released, or a label is read, or the
maximum
Trigger Hold Multiple .
the trigger is released or
scanning.
this mode.
Trigger Pulse Multiple.
Scanning Active Time
Read Timeout
Flashing.
by Flash On Time
Flash is OFF scanning is deactivated.
Always On.
trigger is pulled, the reader acts as if it is in
prevents undesired multiple reads of the same label while in this mode.
Stand Mode.
when an item is placed in the reader's field of view. If the trigger is pulled, the reader acts as if it
in single read mode.
mode.
Trigger Object Sense.
to activate the decoder.
1. Controlled by
Product Reference Guide
When the trigger is pulled, scanning is activated until one of the following
Scanning Active Time has elapsed.
When the trigger is pulled, scanning starts and the product scans until
Scanning Active Time
Double Read Timeout prevents undesired multiple reads of the same label while in
When the trigger is pulled, continuous scanning is activated until
has elapsed or the trigger has been released and pulled again.
1
prevents undesired multiple reads of the same label while in this mode.
1
The reader flashes on and off regardless of the trigger status. Flash rate is controlled
and Flash Off Time. When Flash is ON the imager reads continuously; when
No trigger pull is required to read a barcode. Scanning is continually on. If the
No trigger pull is required to read a barcode. Scanning is turned on automatically
Double Read Timeout
This mode is similar to Stand Mode, except that a trigger pull is required
Flash On Time
.
has elapsed. Reading a label does not disable
Trigger Single Mode. Double Read Timeout
1
prevents undesired multiple reads while in this
Scanning Features
Double
1
47