Mitel sx-100 User Manual page 98

SECTION MITL9105/911
Page B-2
81.05 The SX-200 Equipment Cabinet is of metal construction and has
the following dimensions: height 965 mm (38 in.), width 600 mm
(23.5 in.), and depth 700 mm (27.5 in.). The weight of a fully equipped
system is approximately 131.7 kg (290 lb).
cabinet back panel, (total weight 31.8 kg (70 lb)) and provides all
system power from either a 115 Vat, or a 220 Vat, 44 Hz - 64 Hz
commercial supply, OR a -44 to -56 Vdc supply.
81.07 The SX-lOO/SX-200 Equipment Shelf holds up to 22 printed
circuit cards which plug into the shelf backplane. On the rear of
the backplane are a number of Amphenol-type plugs providing inter-
connections between the shelves and external equipment. In addition
to the plugs are a number of screw-down terminals, allowing shelf
connections to the primary power supply unit. The equipment shelves
measure 273 mm (10.75 in.) high, 480 mm (19 in.) wide, 415 mm
(15.375 in.) deep and weigh approximately 12.3 kg (27 lb) fully
equipped. Equipment Shelf 2 (SX-200 only) is identical in construction
to Equipment Shelf 1 and holds up to 12 additional line or trunk cards.
source. The supply consists of a shelf unit containing eight
Globe Gel 6200 A batteries providing -48.3 Vdc nominal at 20°C (68°F).
A separate temperature-compensated charging unit maintains the cor-
rect battery voltage level. The SX-200 reserve battery power supply
measures 178 mm (7 in.) high, 483 mm (19 in.) wide, 381 mm (15 in.) (I .
deep and weighs 43 kg (110 lb). The SX-100 reserve battery power
supply measures 200.9 mm (8.2 in.) high, 635 mm (25 in.) wide, 40 mm
(18.5 in.) deep, and weighs 125 lb. The SX-lOO/SX-200 charging unit
measures 127 mm (5 in.) wide, 178 mm (7 in.) high, 355 mm (14 in.)
deep and weighs 6.4 kg (14 lb).
lower assembly. Each major assembly consists of the minor
assemblies which are shown in Figure 3-l and are described in the
following paragraphs. The overall dimensions of the console housing
are 366 mm (14.40 in.) wide, 239 mm (9.40 in.) deep and 160 mm (6.30
in.) high.
81.10 Table Bl-1 lists all the tables that comprise the remainder of
this Appendix.