Mitel sx-100 User Manual page 187

SECTION MITL9105/911 O-096-350-NA
I
TOOL REQUIRED
1 Phillios screwdriver I
. -
AT THE NEW CONSOLE
(ZA) Remove fiberglass tape from
top of packing case
(2B) Open packing case and remove
foam sheet
(2C1 Remove foam inserts from ends
of console (if installed)
(2D) Remove console accessory bag
from insert
(2E) Remove console from packing
case
(2F) Remove polyethylene sheet from
console
(2G) Place all packing materials in
packing case for use in
reshipment
' _ . .,
.:i:
:-
AT NEW CONSOLE
(3A) Remove the cradle bracket,
three Phillips screws and two
Allen head screws with key
from accessory bag
(3B) Place console face-down on
desk top
(3C) Position one cradle bracket as
shown in Figure 501-l. (Cradle
bracket may be placed at other
end of console if preferred)
(3D) Attach cradle bracket to
console using three Phillips
screws
(3E) Attach cradle hook to console
with two Allen head screws.
Tighten with Allen key
Issue 3. May 1984
Sheet 1 of 4
START
7
Is the console
to be replaced
NO
AND
AND
CEWDLE
i
ASSEMBLY
2 WASHERS. FELT
2 SCREWS l/4 in.
HEX SOCKET 5116 in.
INSTALL NEW
Figure 501-l
BRACKET
(FIGURE 501-l)
x326lRl
Page E-3