Mitel sx-100 User Manual page 104

SECTION MITL9lOW911
Dial Tone .
Transfer Dial Tone
Busy Tone
Camp-On Busy Tone
Reorder Tone
Camp-On Tone
Override Tone
Supervisor Error Tone
Conferencing Tone
Miscellaneous Tone
DTMF Dialing Conditions
l
Frequency Deviation
Duration
l Interdigit Time.
l
Level, Low Group
Level, High Group
Level, DTMF Signal
Level, Third Frequency
l Twist
Low Frequency
697
770
852
941
Notes: 1. Tolerance of call progress tone levels is 21.15 dBm.
2. Individual tones of any compound tone are within 1 dB of each other.
3. Tolerance of individual tones are fl % of the frequency stated.
Page B-8
TABLE Bl-6
SYSTEM
TABLE
DTMF TONE LIMITS
High Frequency (Hz)
1209 1336
1 2
4 5
7 8
*
0
TONES
3501440 Hz, three bursts 100 ms off followed by
continuous 350/440 Hz, -13 dBm
4801620 Hz, interrupted at 60 ipm, -24 dBm
440 Hz at 60 ips, -13 dBm
Hz, 1 s on, 3 s off, -19 dBm
440 Hz, one burst of 200 ms, -16 dBm
440 Hz, one burst of 800 ms followed by a 200
ms burst ever-v 6 s. -16 dBm
440 H z at 10 ips for 400 ms, - 1 6 dBm
440 Hz, one burst of 1 s, - 1 6 dBm
440 Hz, - 1 6 dBm
Greater than 40 ms
Greater than 40 ms
Greater than -10 dBm
Greater than -8 dBm
Greater than +2 dBm
Less than -40 dB
Less than 4 dB
Bl -7
Frequency deviation: +l %
Signal interval (2 frequency): 40 ms
(minimum)
Per frequency, minimum level: -17 dBm
on line circuit
Twist, maximum (at -10 dBm):
(High f relative to low f)