Mitel sx-100 User Manual page 238

SECTION MITL9105/911 O-096-350-NA
issue 3. May 1984
Sheet 8 of 8
RELAY CONTACT RATING:
RESISTIVE LOAD- 2 A, 28 Vdc
-1 A.. 110 Vat
CHARGER
STATUS
[
NON-OPERATIN
<.
------
--
BATTERY
STATUS
ISCH/LOW VO
NOTES: 1. WHERE CHARGER STATUS INOlCAllON IS REQUIREO. USE TERMINALS 1,2 AND 3. WHERE RESERVE
BATTERY STATUS INDICATION IS REQUIRED. USE TERMINALS 4.5 AND 6.
2. CONNECT ONE LEA0 OF THE ALARM INOICATOR TO THE COMMON TERMINAL OF THE STATUS
INDICATION REQUIRED (TERMINAL 2 FOR CHARGER STATUS; TERMINAL 5 FOR EAl-fERY STATUS).
3. WHERE ALARM INOICATOR REQUIRES A LOOP FOR ACTIVATION. CONNECT THE SECONO LEAD TO
TERMINAL 3 (FOR CHARGER STATUS) OR TERMINAL 6 (FOR BAiTERY STATUS).
4. WHERE ALARM INOICATOR REQUIRES A LOOP OISCONNECTION FOR ACTIVATION. CONNECT THE
SECOND LEAD TO TERMINAL 1 (FOR CHARGER STATUS) OR TERMINAL 4 (FOR BAlTERY STATUS).
X5588
Figure 508-4 Alarm Indicator Connections
Page E-54
,.
c