Mitel sx-100 User Manual page 310

SliCTlON MITLS105/91'iO-096-350-NA
SPEECH PATH TEST
MAP350- 702
Issue 3, May 1984
Sheet 3 of 4
Return all good cards that were
Return the defective card to MITEL.
YES
i
-I81 t
(8A) Remove half the line and trunk
cards (see MAP350-510)
(88) Press the MASTER RESET button 4
AND
on the Scanner card
REMOVE LINE
AND TRUNK
CARDS (SEE
NOTE)
w
Did the error
return within 2
(1lA)
(118)
(11Cl
(110)
The problem is in the line or
trunk cards that were removed
Replace half the. removed cards
Press the MASTER RESET button
on the Scanner card
If the error appears, the
problem is in the cards
replaced. Remove half of them
and perform Step (11C).
Alternate between Step (116)
and Step (11 C) until the
defective card is located
through a process of elimination
The problem is in the
line or trunk cards
Repeat (11) for the remaining
cards until the defective card is
located through a process of
elimination
Go to (12)
Page G-9