Mitel sx-100 User Manual page 113

Cl.09 When backplane translator boards are used with the lines and
trunk circuits, different terminal connections result. In this case,
the cabling arrangements must conform to the termination connec-
tions shown in Figure Cl-8 and Table Cl-6 of this Appendix.
Cl.10 Figures Cl-g, Cl-10 and Cl-11 are in-depth wiring explana-
tions. These figures outline the card position in relation to a
specific Amphenol-type connector to the cross-connect frame.
SECTION MITL9105/911
Page C-3