SECTION MITL9105/911
EXPOSE THE SYSTEM (SX-100) -1
400
Issue 3, May 1984
Sheet 4 of 7
AT FRONT OF EQUIPMENT
(FIGURE 400-2)
Remove the four 5-16 in.
maintenance
panel
retaining
screws and washers
Remove the maintenance cable
tie from the side of the cabinet
Remove the maintenance panel -
Remove the eight 5-16 in.
retaining screws and washers
from the equipment shelf
Remove the ground lug wire
Remove the equipment shelf and
power supply. Note that the
power supply must be supported
Page D-6
From (3)
AND
REMOVE
MAINTENANCE
PANEL
A N D
REMOVE
EQUIPMENT
SHELF
N O
work
complete