Telefile Recording - Sony SRW-1 Operation Manual

Recording/playback
signal
1080/4:2:2 23.98Ps
F
24PsF
25PsF
29.97Ps
F
50i
59.94i
50P
59.94P
1080/4:4:4SQ 23.98Ps
1080/4:4:4HQ F
1080/
4:2:2DUAL
24PsF
a)
STREAM
25PsF
29.97Ps
F
50i
59.94i
b)
720/4:2:2 50P
59.94P
a) 1080/4:2:2 DUAL STREAM HD monitor output and SD monitor output
can be switched by selected "Link-A" or "Link-B" under MON SEL(x2)
in the VIDEO Setup menu.
b) No SD monitor output.
c) When PD(MON) > OUTPUT is set to THRU in the VIDEO Setup menu.
d) When PD(MON) > OUTPUT is set to AUTO in the VIDEO Setup menu.
e) Pulldown is not supported.
f) Output as interlaced video in which Link-A and Link-B pictures have been
linearly interpolated.
To check the signals output to the video monitors
With the FUNC button on the control panel held down,
press the HOME button.
The display at the bottom of the HOME screen changes to
show the formats of the signals currently being output to
the HD and SD video monitors.
When superimposed text is displayed on the video
monitors, the signal formats are also displayed on the
video monitors for a few seconds after the REC button on
the control panel is pressed to output an E-E picture (see
page 37).

5-1-2 TeleFile Recording

This system records the following TeleFile data to cassette
labels with each recording operation.
• IN (recording start point)
64
5-1 Signal Format Settings
HD monitor Output SD
monitor
Output
1080/ c) 525/
23.98PsF
4:2:2 59.94i
d)
59.94i
e) –
24PsF
25PsF 625/50i
29.97PsF 525/
59.94i
50i 625/50i
59.94i 525/
59.94i
f) 625/50i
50i
f) 525/
59.94i
59.94i
c) 525/
23.98PsF
59.94i
d)
59.94i
–
e)
24PsF
25PsF 625/50i
29.97PsF 525/
59.94i
50i 625/50i
59.94i 525/
59.94i
720/ 50P –
4:2:2
59.94P –
• OUT (recording end point)
• Tape format
• Duration (time from In point to Out point)
• File name (automatically assigned file name in the
format HDCAMSR_00X)
Note
TeleFile data may not be saved correctly if the POWER
ON/OFF switch is set to the OFF position within one
second after the end of recording.
When the number of files exceeds 70
Old files are deleted before new files are added.
To delete all or selected files, use the SRW-5000/5500 to
format the memory label or carry out a file deleting
operation.