Sony SRW-1 Operation Manual page 55

Hd portable digital recorder/hd video processor
Hide thumbs Also See for SRW-1:
Table of Contents

Advertisement

Item
FORMAT
LINE
Signal format settings
FRAME
SIGNAL
SELECT FPS
FPS FORMAT
Settings
Sets the number of effective lines and the scanning system.
1080I [1080I]
1080P [1080PsF/P]
720P [720P]
When the SELECT FPS item is set to "OFF", sets the operation
frame frequency. When the SELECT FPS item is set to other
than "OFF", sets the target frame frequency.
23.98 [23.98]: Frame frequency 23.976 Hz
24 [24]: Frame frequency 24 Hz
25 [25]: Frame frequency 25 Hz (field frequency 50 Hz)
29.97 [29.97]: Frame frequency 29.97 Hz (field frequency
59.94 Hz)
50 [50]: Frame frequency 50 Hz
59.94 [59.94]: Frame frequency 59.94 Hz
For more information, see 7-2-2 "Using the Select FPS Function"
(page 85).
Sets the sampling method and video signal recording rate.
422 [4:2:2]: 4:2:2 (Y/Pb/Pr), 440 Mbps (880 Mbps for 50P or
59.94P)
422x2 [4:2:2 Dual Stream]: 4:2:2 (Y/Pb/Pr) DUAL STREAM, 880
Mbps
444SQ [4:4:4 SQ]: 4:4:4 (R/G/B), SQ mode, 440 Mbps (880
Mbps for 50P or 59.94P)
444HQ [4:4:4 HQ]: 4:4:4 (R/G/B), HQ mode, 880 Mbps
Note
Tapes recorded with the 444HQ setting cannot be played back
on the SRW-5000/5500. Also, certain limitations apply to when
tapes recorded in other 880 Mbps formats are played back on
the SRW-5000/5500.
For details, see "About Recording/Playback Tape Formats"
(page 116).
When the HKSR-102 is installed, selects the operating mode of
the Select FPS function.
OFF [Off]: Do not use the Select FPS function.
ON [On]: Enable Select FPS function with frame rate (FPS) set
on camera.
DUB [Dub(bypass MY)]: Record without using the HKSR-102.
(Select this to dub a tape recorded with the Select FPS
function.)
VTR [VTR]: Enable Select FPS function with frame rate (FPS)
set on the SRW-1.
For details, see 7-2 "Select FPS Function" (page 84).
Note
When the HKSR-102 is not installed in this unit, the ON and DUB
settings have the same effect.
Selects the system format when the Select FPS function is
enabled.
DEF [Default]: Use the factory default settings.
23/24 [23.98/24]
25 [25]
29/30 [29.97/30]
50 [50]
59/60 [59.94/60]
For details, see 7-2 "Select FPS Function" (page 84).
55
4-5 SYSTEM Setup Menu

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srpc-1Hksr-102Hksr-103Hksr-101

Table of Contents