Display Settings - Sony SRW-1 Operation Manual

The BATTERY item in the SYSTEM Setup menu (see
page 61) allows you to set the battery voltages for which
NEAR END and END warnings are issued.
36

3-5 Display Settings

3-5 Display Settings
If the display is hard to see because of low light conditions,
you can set the LIGHT switch to ON to turn on the
backlight.
dB ANLG ANLG SDI SDI SDI SDI SDI SDI SDI SDI A/E
0
-10
HOME
-20
-30
-60
TC EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP
PB
L R L R L R L R L R L R L R L R L R L R L R
1 2 3 4 5 6 7 8 9 10 11
SRW-1
VIDEO OOOO PLAY LOCK
TCR LTC INTRP DF EXT-LK KEYINHI
AUDIO 00 00 00 00
H M S
SYSTEM
IN: --:--:--:--
1080 LOCAL
12.2V REMAIN CH.COND
S59P
(29PsF)
46min
4:2:2 21:46
To make the backlight brighter
Select LCD >BRIGHT in the SYSTEM Setup menu (see
page 56) and adjust the brightness (0 to 31) in the
Backlight Brightness window.
To turn the backlight off after a specified
interval
Select LCD >LIGHT OFF in the SYSTEM Setup menu
(see page 56) and select the time that the backlight should
remain on (5 seconds to 5 minutes) in the Backlight Off
Timer window.
To keep the backlight on, select "Disable."
To display a screen saver after a specified
interval
Select LCD >SAVER in the SYSTEM Setup menu (see
page 56) and select the time after which the screen saver
should appear (1 minute to 1 hour) in the Screen Saver
window.
Select "Disable" if you do not want to display a screen
saver.
See 4-1"Basic Menu Operations" (page 44) for more
information about menu operations.
LIGHT switch
A/E
KEY INHI
OFF ON
SELECT/ENTER
EMP LIGHT
L R
BACK
12
OFF ON
ADJUST
RECINHI
EJECT STOP PLAY REC
Z x B z
F
REW F FWD PAUSE
FUNC
m M X
PB