Sony SRW-1 Operation Manual page 105

Error messages
Refer to the Maintenance Manual for more detailed
information about the content of error messages, and about
errors not listed here.
Code
a)
SRW-1 error SRPC-1 error
0010 0110
0011 0111
0012 —
0014 0114
— 0115
0050 —
0057 —
0058 —
005A —
005C —
005F —
0060 —
0061 —
0062 —
0063 —
0064 —
0065 —
0066 —
0067 —
0068 —
0069 —
006B —
006C —
006D —
006E —
006F —
0070 —
0071 —
0072 —
0073 —
0074 —
0075 —
0076 —
Message
b)
FAN STOP
DC VOLTAGE DOWN
BATT TEMPERATURE NG
NO REC RF
EQ NVRAM SUM ERROR
CONT REC NG TC
CONT REC NG SV
TIMER REC NG
EQ TEMP NG
SLACK-10
SLACK-11
SLACK-12
SLACK-35
SLACK-45
SLACK-75
SLACK-70
SLACK-71
SLACK-20
SLACK-21
SLACK-23
SLACK-24
SLACK-100
SLACK-50
SLACK-51
SLACK-72
SLACK-61
SLACK-62
SLACK-63
SLACK-64
SLACK-65
SLACK-66
Description
A cooling fan stopped.
Decline in DC voltage was detected.
Abnormal battery temperature was detected.
(Exchange the battery.)
Recording error occurred. Could not detect RF
signal.
EQ NVRAM operating error was detected.
Sequential recording error was detected.
Sequential recording error was detected.
Timer Rec error was detected.
Abnormal EQ temperature was detected.
Drum drive voltage error was detected.
Drum FG error was detected.
Drum PG error was detected.
S reel rotation was detected in stop mode.
Abnormal ratio of T reel speed to capstan speed was
detected during fast forward.
It is necessary to check the cassette.
Servo NVRAM communications error was detected.
System control initialization command error was
detected.
Capstan drive voltage error was detected.
Capstan FG error was detected.
Capstan rotation direction error was detected.
Capstan speed error was detected.
Tension error was detected during rewind.
Tape adhesion was detected at the position
immediately after the start of tape threading.
Tape adhesion was detected at the position where
tape threading is in progress.
The SE and SV board combination is incorrect.
Function cam forward rotation time-out error was
detected.
Function cam reverse rotation time-out error was
detected.
Tape top detection time-out error was detected.
Full top detection time-out error was detected.
Tape end detection time-out error was detected.
Cassette ejection error was detected.
Error Messages and Warning Messages
105