Recording Procedure - Sony PCM-2000 Operation Manual

3-1-2. Recording Procedure
Preparation
Operation
Before recording, first follow the steps in "3-1-1. Preparation".
= Lene
© _2 2h 2 |
Window side Safety tab
1 Insert a cassette.
Refer to "2-4. About the DAT cassette".
Check that the safety tab is closed.
2 Set the recorder in the recording pause mode.
Press #1 PAUSE (the indicator lights up) and slide @ REC to the right (the
indicator lights up).
3 Input the recording source.
4 Adjust the recording level for both channels using the REC LEVEL controls. (only
when recording analog input)
1) Adjust the L channel with the outer control.
2) Press the inner control (it pops out) and adjust the R channel. Push the control
back in.
5 Press ul PAUSE to release the pause mode.
Recording starts.
To stop recording for a moment
Press 1§ PAUSE.
The indicator lights up and the recorder enters recording pause mode.
To resume recording, press If PAUSE again.
When recording is finished
Press m STOP.
Recording mode will be canceled.
27 (E)
JE ea