Sony SRW-1 Operation Manual page 51

Item
LUT(MON) LUT MODE Selects whether or not to perform LUT conversion, and selects the bank that contains the LUT file
For details
about LUT file
operations,
see "Monitor
LUT Function"
(page 120).
LUT
STATUS
LUT LOAD
LUT SAVE
LUT
RESET
LEVEL CLIP 444t422
Settings
to use when LUT conversion is performed.
OFF [Off]: Do not perform LUT conversion.
BANK0 [Bank 0]: Select the LUT file of Bank0.
BANK1 to BANK3 [Bank 1 to Bank 3]: Select the LUT file of one of Bank1 to BANK3.
FtH [Full to Head]: Instead of using a LUT file, generate and display standard video levels from
64 (0% black) to 940 (100% white) steps for signals that exceed the HD video level range (10-
bit signal levels, 4 to 1019 steps).
Displays a list of the LUT files in the banks. The currently selected file is displayed in yellow. You
can select a file to display simple I/O curves, and to delete unneeded LUT files from the banks.
Loads a LUT file from a "Memory Stick" to a bank.
Saves a LUT file from a bank to a "Memory Stick".
Deletes all LUT files from Bank0 to Bank3.
When the RGB 4:4:4 format is selected, selects whether to clip black level 0% and lower for 4:4:4
to 4:2:2 conversion of the output from the MONITOR OUT HD/SD SDI connector.
BLACK [Black Clip]: Clip.
OFF [Clip Off]: Do not clip.
51
4-3 VIDEO Setup Menu