Sony SRW-1 Operation Manual page 83

Menu Settings
Format
SIGNAL FRAME
(target frame
frequency)
b) 23.98
4:4:4 SQ
24
25
29.97
a) With HKSR-103 not installed
b) With HKSR-103 installed
Example settings
Signal format (SIGNAL): 4:4:4 SQ
Target frame frequency (FRAME): 24 Hz
In this case, 23/24, 25 or 29/30 can be selected for "FPS
FORMAT". When the HKSR-103 is installed, 50 and 59/
60 can also be selected.
These selections differ in their system frequencies, slow
motion effects, and in whether or not they can be output to
an SD monitor.
• When 23/24 is selected
The system frame frequency is set to 24 Hz.
Input a 24 Hz signal as reference signal. The maximum
number of frames is 24 FPS. Since SD monitor output is
disabled, use HD monitor output. Selecting 1FRM in the
Interval Frame function sets 24 FPS (one time normal
playback speed).
• When 25 is selected
The system frame frequency is set to 25 Hz.
Input a 25 Hz signal as reference signal. The SD monitor
output becomes 625/50i. However, the maximum
number of frames is 25 FPS.
FPS FORMAT SELECT FPS System
23/24
DEF or 29/30
59/60
23/24
25
DEF or 29/30
50
When set to
"ON" or
"VTR"
59/60
b
25
DEF or 29/30
50
59/60
DEF or 29/30
59/60
State of SRW-1
Format indication
frame
frequency
(Hz)
23.98 1080 S23PsF (23PsF)
4:4:4 SQ
29.97 1080 S29PsF (23PsF)
4:4:4 SQ
59.94 1080 S59P (23PsF)
4:4:4 SQ
24 1080 S24PsF (24PsF)
4:4:4 SQ
25 1080 S25PsF (24PsF)
4:4:4 SQ
30 1080 S30PsF (24PsF)
4:4:4 SQ
50 1080 S50P (24PsF)
4:4:4 SQ
60 1080 S60P (24PsF)
4:4:4 SQ
25 1080 S25PsF (25PsF)
4:4:4 SQ
30 1080 S30PsF (25PsF)
4:4:4 SQ
50 1080 S50P (25PsF)
4:4:4 SQ
60 1080 S60P (25PsF)
4:4:4 SQ
29.97 1080 S29PsF (29PsF)
4:4:4 SQ
59.94 1080 S59P (29PsF)
4:4:4 SQ
• When 29/30 is selected
The system frame frequency is set to 30 Hz.
Input a 30 Hz signal as reference signal. Since the
number of frames can be set up to 30 FPS, this selection
is effective for further enhancing slow motion effects.
However, SD monitor output is disabled. Use HD
monitor output.
• When 50 is selected (with HKSR-103 installed)
The system frame frequency is set to 50 Hz.
Input a 25 Hz signal as reference signal. Since the
number of frames can be set up to 50 FPS, this selection
is effective for further enhancing slow motion effects.
SD monitor output is 625/50i.
• When 59/60 is selected (with HKSR-103 installed)
The system frame frequency is set to 60 Hz.
Input a 30 Hz signal as reference signal. Since the
number of frames can be set up to 60 FPS, this selection
is effective for obtaining the maximum slow motion
effect. However, SD monitor output is disabled. Use HD
monitor output.
REF SD monitor
signal output
frame
frequency
(Hz)
23.98 525/59
29.97 525/59
29.97 525/59
24 Not output
25 625/50i
30 Not output
25 625/50i
30 Not output
25 625/50i
30 Not output
25 625/50i
30 Not output
29.97 525/59
29.97 525/59
7-1 Overview
83