Sony SRW-1 Operation Manual page 56

Item
REFERENCE
Reference signal
selection
TEST SG
Test signal output
settings
Note
Both VIDEO and
AUDIO settings
return to OFF (factory
default setting) when
you power the system
off.
LCD
Display backlight
settings
56
4-5 SYSTEM Setup Menu
MODE
EXTERNAL
VIDEO
AUDIO
LIGHT OFF
BRIGHT
SAVER
SAVER MSG
Settings
Selects the input signals to use as reference signal.
INP [Input]: Video signals input to the HD SDI IN A/B connectors.
EXT [External]: Signals selected with the next item EXTERNAL.
When the previous item MODE is set to EXT, selects the signals
to use as reference signal.
HD [HD]: During playback and audio signal recording, use an HD
tri-level sync signal input to the REF IN HD connector.
SD [SD]: When the frame frequency is 29.97 Hz or 25 Hz, use a
VBS signal input to the REF IN SD connector.
HD&SD [HD&SD]: When the frame frequency is 23.98 Hz, use
an HD tri-level sync signal input to the REF IN HD connector,
and a VBS signal input to the REF IN SD connector.
Determines whether to make the internal video signal generator
generate a test signal.
OFF [Off]: Generate no test signal.
CB [Color Bar]: Generate a color bar signal.
SMPTE [SMPTE Color Bar]: Generates an SMPTE color bar
signal.
RP219 [RP-219 Color Bar]: Generate an RP-219 color bar
signal.
BLK [Black]: Generate a black signal.
Determines whether to make the internal audio signal generator
generate a test signal.
Settings for internal audio signal generator
OFF [Off]: Generate no test signal.
1KHz [1KHz Sine]: Generate a sine wave signal of 1 kHz.
NONE [Silence]: Generate a muted signal.
Determines whether to turn the backlight off after a specified
interval.
DIS [Disable]: Do not turn off.
5sec [5sec]: Turn off after 5 seconds.
10sec [10sec]: Turn off after 10 seconds.
30sec [30sec]: Turn off after 30 seconds.
1min [1min]: Turn off after 1 minute.
3min [3min]: Turn off after 3 minutes.
5min [5min]: Turn off after 5 minutes.
Sets the brightness of backlight.
0 to 31 (20)
Determines whether to display a screen saver after a specified
interval.
DIS [Disable]: Do not display.
1min [1min]: Display after 1 minute.
3min [3min]: Display after 3 minutes.
5min [5min]: Display after 5 minutes.
10min [10min]: Display after 10 minutes.
20min [20min]: Display after 20 minutes.
30min [30min]: Display after 30 minutes.
1hour [1hour]: Display after 1 hour.
Sets a screen saver message.