Using The Slow Shutter Function - Sony SRW-1 Operation Manual

Format: S29PsF (29PsF) SELECT FPS = ON
Stored frames: 3FRM (29.97PsF, 10 FPS)
Shooting at 10 FPS
1 2
Transfer at 30P
1 NV NV 2 NV NV
1 2 3 4 5 6
Store only effective frames
in memory.
Record only effective frames onto tape (with continuous 30F timecode).
Playback: 30P
Playback at 30P
1 2 3 4
Quick motion at 3 times normal playback speed with afterimaging
7-4-2 Using the Slow Shutter
Function
1
Connect this unit and the HDC-F950.
Note
Before starting, install the optional HKSR-101 and
HKSR-102 boards in this unit.
For details on how to connect this unit to the HDC-
F950, see "To perform separate operation by optical-
fiber connection" (page 87).
2
Make system settings.
Select the target frame frequency (24, 25, or 30PsF),
and select the recording format and picture quality
(4:2:2, 4:4:4 SQ, or 4:4:4 HQ).
Example settings: Settings for 24 frames of target
frame frequency (23.98PsF) and 4:4:4 SQ
recording format and picture quality.
98
7-4 Slow Shutter Function
3 4
Store 3 frames (29.97PsF, 10 FPS).
3 NV NV 4 NV NV
30P
NV: Ineffective frame
7 8 9 10 11
HKSR-102
Converted to 29.97PsF when SELECT FPS is set to "OFF".
10 11
30P
10 11
10 NV NV 11 NV NV
SRW-1+SRPC-1+HKSR-101+HKSR-102
30
1 Carry out steps 1 and 2 of "To set with FORMAT"
(page 62) in 5-1-1 "Selecting the System Signal
Format".
2 Set as shown below, according to the camera
system format.
S Y S T E M S e t u p
FORMAT
REFERENCE
TEST SG
LCD
KEYMAP
KEYINHI MAP
REMOTE/LOCAL
SERVO
REC INHI OFF
EDIT
POWER
BATTERY
OTHERS
S R W - 1 C A S S O U T
3 In the submenu window, select [SET].
The formats of the unit and the camera are switched, and
"S23PsF(23PsF)" appears in the display (for about 30
seconds).
HDC-F950 (in separate
operation with optical-fiber
connection)
Cassette
Signal Format
LINE 1080P
FRAME 23.98
SIGNAL 444SQ
SELECT FPS ON
FPS FORMAT 23/24
[SET]
00:00:00:00
T C R