About Warning Messages - Sony SRW-1 Operation Manual

Code
a)
SRW-1 error SRPC-1 error
0077 —
0078 —
0079 —
007A —
007C —
007D —
007F —
a) When an SRW-1 error is detected, the error code is displayed following
the indication "VTR:".
b) When an SRPC-1 error is detected, the error code is displayed following
the indication "VA:".

About Warning Messages

If one of the conditions described in the table of warning
messages (see page 107) is detected, a warning message
code appears in the operation status and warnings section
of the control panel display (see page 15). This section is
visible when the display is showing the HOME screen.
Note
Warning messages do not appear unless the display is
showing the HOME screen. To display the HOME screen,
press the HOME button on the control panel.
To check the content of warning messages
Press the SELECT/ENTER dial on the control panel. A
popup window appears to display messages for the current
warnings.
Only one message is displayed at one time, even if
multiple warnings occur. But the number of current
warnings appears at the bottom of the popup window.
106
Error Messages and Warning Messages
Message
b)
F-TOP SENSOR ERR
SLACK-32
SLACK-42
SLACK-33
SLACK-34
SLACK-44
HUMID ERROR
Description
FULL TOP sensor error was detected.
(Exchange the sensor.)
S-reel FG error was detected.
T-reel FG error was detected.
S-reel direction error was detected.
S-reel speed error was detected.
T-reel speed error was detected.
Condensation detector detected condensation.
Example:
Popup window displaying warning message
"VTR: 0010 TELEFILE FULL"
dB
ANA ANA SDI SDI SDI
0
-10
-20 W AR NI NG
-30
-60
EMP EMP EMP EMP EMP
PB
L R L R L R L R L R
1 2 3 4 5
VTR:0010 VTR:0010
TELEFILE FULL TELEFILE FULL
OOOO PLAY LOCK
TCR LTC INTRP DF
Telefile Memory is Full
00 00
H M
O Error(s)/
12.2V REMAIN CH.COND
18min
There is no current error (see page 104).
There are three current warnings.
To view the other messages, rotate the SELECT/ENTER dial
on the control panel.
When a warning message appears
Take any action that may be needed to eliminate the cause
of the warning.
SDI SDI SDI SDI SDI A/E A/E
EMP EMP EMP EMP EMP EMP EMP
L R L R L R L R L R L R L R
6 7 8 9 10 11 12
VTR OOOOO
EXT-LK KEYINHI
RECINHI
00 00
S F
3 Warning(s)
IN: --:--:--:--
1080 LOCAL
S59P
PB
(29PsF)
4:2:2 21:46