Table 63 Interface > Cellular > Add - ZyXEL Communications ZyWALL USG 100 Series User Manual

The following table describes the labels in this screen.
Table 63 Interface > Cellular > Add
LABEL
Enable Interface
Interface
Properties
Interface
Name
Zone
Extension Slot
Connected
Device
Description
Connectivity
Nailed-Up
Idle timeout
ISP Settings
Profile
Selection
APN
Dial String
Authentication
Type
SIM Card Setting
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Select this option to turn on this interface.
This field is read-only. This is the name of the cellular interface.
Select the zone to which you want the cellular interface to belong. The zone
determines the security settings the ZyWALL uses for the interface.
This is the PCMCIA or USB slot that you are configuring for use with a 3G card.
This displays the manufacturer and model name of your 3G card if you inserted
one in the ZyWALL. Otherwise, it displays none.
Enter a description of this interface. It is not used elsewhere. You can use
alphanumeric and
()+/:=?!*#@$_%-
characters long.
Select this if the connection should always be up. Clear this to have the ZyWALL
to establish the connection only when there is traffic. You might not nail up the
connection if there is little traffic through the interface or if it costs money to keep
the connection available.
This value specifies the time in seconds (0~360) that elapses before the ZyWALL
automatically disconnects from the ISP's server. Zero disables the idle timeout.
Select Device to use one of the 3G device's profiles of device settings. Then
select the profile (use Profile 1 unless your ISP instructed you to do otherwise).
Select Custom to configure your device settings yourself.
This field is read-only if you selected Device in the profile selection. Select
Custom in the profile selection to be able to manually input the APN (Access
Point Name) provided by your service provider. This field applies with a GSM or
HSDPA 3G card. Enter the APN from your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS
(Multi-Media Messaging Service)) and charge method.
You can enter up to 63 ASCII printable characters. Spaces are allowed.
Enter the dial string if your ISP provides a string, which would include the APN, to
initialize the 3G card.
You can enter up to 63 ASCII printable characters. Spaces are allowed.
This field is available only when you insert a GSM 3G card.
The ZyWALL supports PAP (Password Authentication Protocol) and CHAP
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
None: No authentication for outgoing calls.
CHAP - Your ZyWALL accepts CHAP requests only.
PAP - Your ZyWALL accepts PAP requests only.
Chapter 10 Interface
characters, and it can be up to 60
233