Figure 550 Maintenance > Report > Session; Table 267 Maintenance > Report > Session - ZyXEL Communications ZyWALL USG 100 Series User Manual

Figure 550 Maintenance > Report > Session
The following table describes the labels in this screen.
Table 267 Maintenance > Report > Session
LABEL
View
Refresh
User
Service
Source Address
Destination
Address
Search
sessions per
page
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Select how you want the information to be displayed. Choices are:
sessions by users - display all active sessions by user
sessions by services - display all active sessions by service or protocol
all sessions - filter the active sessions by the User, Service, Source Address,
and Destination Address, and display them by user.
The User, Service, Source Address, and Destination Address fields are only
available when all sessions is selected.
Click this button to update the information on the screen. The screen also refreshes
automatically when you open and close the screen.
The User, Service, Source Address, and Destination Address fields have no
effect until you click the Search button, even if you click the Refresh button.
This field is only available when all sessions is selected. Type the user whose
sessions you want to view. It is not possible to type part of the user name or use
wildcards in this field; you must enter the whole user name.
This field is only available when all sessions is selected. Select the service or
service group whose sessions you want to view. The ZyWALL identifies the service
by comparing the protocol and destination port of each packet to the protocol and
port of each services that is defined. (See
information about services.)
This field is only available when all sessions is selected. Type the source IP
address whose sessions you want to view. You cannot include the source port.
This field is only available when all sessions is selected. Type the destination IP
address whose sessions you want to view. You cannot include the destination port.
Click this button to update the information on the screen using the filter criteria in
the User, Service, Source Address, and Destination Address fields.
Select the number of active sessions displayed on each page. You can use the
arrow keys on the right to change pages.
Chapter 47 Reports
Chapter 38 on page 623 for more
741