Address Group Add/Edit Screen; Figure 459 Object > Address > Address Group > Add; Table 209 Object > Address > Address Group; Table 210 Object > Address > Address Group > Add - ZyXEL Communications ZyWALL USG 100 Series User Manual

Chapter 37 Addresses
The following table describes the labels in this screen. See
more information as well.
Table 209 Object > Address > Address Group
LABEL
#
Name
Description
Add icon

37.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group or edit an
existing one. To access this screen, go to the Address Group screen (see
619), and click either the Add icon or an Edit icon.
Figure 459 Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 210 Object > Address > Address Group > Add
LABEL
Name
Description
620
DESCRIPTION
This field is a sequential value, and it is not associated with a specific address
group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
This column provides icons to add, edit, and remove address groups.
To add an address group, click the Add icon at the top of the column. The Address
Group Add/Edit screen appears.
To edit an address group, click the Edit icon next to the address group. The
Address Group Add/Edit screen appears.
To delete an address group, click on the Remove icon next to the address group.
The web configurator confirms that you want to delete the address group.
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores( _ ), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
This field displays the description of each address group, if any. You can use up to
60 characters, punctuation marks, and spaces.
Section 37.3.1 on page 620
Section 37.3 on page
ZyWALL USG 100/200 Series User's Guide
for