How To Configure The Backup Zywall; Figure 120 Device Ha > General: Master Zywall Example; Figure 121 Device Ha > Active-Passive Mode > Edit: Backup Zywall Example - ZyXEL Communications ZyWALL USG 100 Series User Manual

Figure 120 Device HA > General: Master ZyWALL Example

6.9.3 How to Configure the Backup ZyWALL

1 Connect a computer to ZyWALL B's lan1 interface and log into its web configurator.
Connect ZyWALL B to the Internet and subscribe it to the same subscription services
(like content filtering and anti-virus) to which ZyWALL A is subscribed. See
on page 189
2 In ZyWALL B click Device HA > Active-Passive Mode. Click lan1's Edit icon.
3 Configure 192.168.1.5 as the Management IP and 255.255.255.0 as the Subnet Mask.
Click OK.
Figure 121 Device HA > Active-Passive Mode > Edit: Backup ZyWALL Example
4 Set the Device Role to Backup. Turn on monitoring for the wan1 and lan1 interfaces.
Set the Synchronization Server Address to 192.168.1.1, the Port to 21, and the
Password to "mySyncPassword". Select Auto Synchronize and set the Interval to 60.
Click Apply.
ZyWALL USG 100/200 Series User's Guide
for more on the subscription services.
Chapter 6 Tutorials
Chapter 8
169