ZyXEL Communications ZyWALL USG 100 Series User Manual page 774

Appendix A Log Descriptions
Table 288 SSL VPN Logs (continued)
LOG MESSAGE
The %s is same subnet
with IP pool in SSL
VPN policy %s. So %s
will not be injected
to client side.
The SSL VPN policy %s
does not configure
users or user groups.
SSL VPN policy rule %s
has been inserted.
SSL VPN policy rule %s
has been appended.
SSL VPN policy rule %s
has been modified.
SSL VPN policy rule %s
has been moved to %d.
SSL VPN policy rule %s
has been deleted.
%s %s is accessed.
sent=<bytes>
rcvd=<bytes>
%s %s from %s has been
logged out SSLVPN (re-
auth timeout)
%s %s from %s has been
logged out SSLVPN
(lease timeout)
%s %s from %s has been
logged out SSLVPN
(idle timeout)
Failed login attempt
to SSLVPN from %s
(login on a lockout
address)
Failed login attempt
to SSLVPN from %s
(reach the max. number
of user)
774
DESCRIPTION
The specified address object (first %s) is in the same subnet as the IP
pool in the listed SSL VPN policy (second %s), so the listed address
(third %s) will not be given to an SSL VPN client.
There are no users or user groups configured for the listed SSL VPN
policy (%s).
The listed SSL VPN policy (%s) has been inserted in the list of SSL
VPN policy rules.
The listed SSL VPN policy (%s) has been added to the end of the list.
The configuration of the listed SSL VPN policy (%s) has been
changed.
The listed SSL VPN policy (%s) has been moved to the listed position
(%d) in the list of SSL VPN policies.
The listed SSL VPN policy has been removed.
The listed SSL VPN access was used to send and receive the listed
numbers of bytes.
The first %s is the type of SSL VPN access (web application, file
sharing, or network extension).
The second %s is the name of the application. This is N/A for a
network extension.
The specified user was signed out by the device due to a re-
authentication timeout.
The first %s is the type of user account.
The second %s is the user's user name.
The third %s is the name of the service the user is using (HTTP or
HTTPS).
The specified user was signed out by the device due to a lease
timeout.
The first %s is the type of user account.
The second %s is the user's user name.
The third %s is the name of the service the user is using (HTTP or
HTTPS).
The specified user was signed out by the device due to an idle
timeout.
The first %s is the type of user account.
The second %s is the user's user name.
The third %s is the name of the service the user is using (HTTP or
HTTPS).
An SSL VPN login attempt from the listed user (%s) was blocked due
to too many failed login attempts.
The listed user (%s) failed to log into SSL VPN because the maximum
number of users were already logged in.
ZyWALL USG 100/200 Series User's Guide