The Other Applications Add/Edit Screen; Figure 375 Apppatrol > Other > Edit; Table 149 Apppatrol > Other > Edit - ZyXEL Communications ZyWALL USG 100 Series User Manual

Chapter 28 Application Patrol
Table 148 AppPatrol > Other (continued)
LABEL
Log
Add icon
Apply
Reset

28.4.1 The Other Applications Add/Edit Screen

The Other Configuration Add/Edit screen allows you to create a new condition or edit an
existing one. To access this screen, go to the Other Protocol screen (see
468), and click either the Add icon or an Edit icon.
Figure 375 AppPatrol > Other > Edit
The following table describes the labels in this screen.
Table 149 AppPatrol > Other > Edit
LABEL
Enable
Port
470
DESCRIPTION
Select whether to have the ZyWALL generate a log (log), log and alert (log alert)
or neither (no) when traffic matches this policy. See
more on logs.
Click the Add icon in the heading row to add a new first entry.
The Active icon displays whether the entry is enabled or not. Click the Active icon
to activate or deactivate the entry. Make sure you click Apply to save and apply the
change.
Click the Edit icon to go to the screen where you can edit the entry.
Click the Add icon in an entry to add a new entry below the current entry.
Click the Remove icon to delete an existing entry from the ZyWALL. A window
displays asking you to confirm that you want to delete the entry.
To move an entry up or down in the list, click on the Move to N icon next to the
entry, and type the line number (# field) of where you want to move the entry. The #
field is updated accordingly. The ordering of the entries is important as they are
applied in order of their numbering.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select this check box to turn on this policy.
Use this field to specify a specific port number to which to apply this policy. Type
zero, if this policy applies for every port number.
Chapter 46 on page 725
Section 28.4 on page
ZyWALL USG 100/200 Series User's Guide
for