Setting Screen; Figure 450 User/Group > Group > Add; Table 202 User/Group > Group > Add - ZyXEL Communications ZyWALL USG 100 Series User Manual

Figure 450 User/Group > Group > Add
The following table describes the labels in this screen.
Table 202 User/Group > Group > Add
LABEL
Name
Description
Available
Member
OK
Cancel

36.4 Setting Screen

The Setting screen controls default settings, login settings, lockout settings, and other user
settings for the ZyWALL. You can also use this screen to specify when users must log in to the
ZyWALL before it routes traffic for them.
To access this screen, login to the web configurator, and click Object > User/Group >
Setting.
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores( _ ), or dashes (-), but the first character cannot be a number. This
value is case-sensitive. User group names have to be different than user names.
Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
This field displays the names of the users and user groups that can be added to the
user group.
Select users and groups that you want to be members of this group and click the
right arrow to add them to the member list.
This field displays the names of the users and user groups that have been added to
the user group. The order of members is not important. To remove members, select
them and click the left arrow.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 36 User/Group
609