Ip/Mac Binding Exempt List; Figure 241 Network > Ip/Mac Binding > Edit > Add; Figure 242 Network > Ip/Mac Binding > Exempt List; Table 111 Network > Ip/Mac Binding > Edit > Add - ZyXEL Communications ZyWALL USG 100 Series User Manual

Chapter 19 IP/MAC Binding
Figure 241 Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
Table 111 Network > IP/MAC Binding > Edit > Add
LABEL
Interface Name
IP Address
MAC Address
Description
OK
Cancel

19.3 IP/MAC Binding Exempt List

Click Network > IP/MAC Binding > Exempt List to open the IP/MAC Binding Exempt
List screen. Use this screen to configure ranges of IP addresses to which the ZyWALL does
not apply IP/MAC binding.
Figure 242 Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 112 Network > IP/MAC Binding > Exempt List
LABEL
#
Name
Start IP
338
DESCRIPTION
This field displays the name of the interface within the ZyWALL and the interface's
IP address and subnet mask.
Enter the IP address that the ZyWALL is to assign to a device with the entry's MAC
address.
Enter the MAC address of the device to which the ZyWALL assigns the entry's IP
address.
Enter up to 64 printable ASCII characters to help identify the entry. For example,
you may want to list the computer's owner.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
DESCRIPTION
This is the index number of the IP/MAC binding list entry.
Enter a name to help identify this entry.
Enter the first IP address in a range of IP addresses for which the ZyWALL does not
apply IP/MAC binding.
ZyWALL USG 100/200 Series User's Guide