Console Port Speed; Dns Overview; Dns Server Address Assignment; Figure 495 System > Console Speed - ZyXEL Communications ZyWALL USG 100 Series User Manual

Chapter 44 System

44.4 Console Port Speed

This section shows you how to set the console port speed when you connect to the ZyWALL
via the console port using a terminal emulation program. See
console port settings.
Click System > Console Speed to open the Console Speed screen.
Figure 495 System > Console Speed
The following table describes the labels in this screen.
Table 239 System > Console Speed
LABEL
Console Port
Speed
Apply
Reset

44.5 DNS Overview

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. The DNS server is extremely important because without it, you must know the
IP address of a machine before you can access it.

44.5.1 DNS Server Address Assignment

The ZyWALL can get the DNS server addresses in the following ways.
• The ISP tells you the DNS server addresses, usually in the form of an information sheet,
when you sign up. If your ISP gives you DNS server addresses, manually enter them in the
DNS server fields.
• If your ISP dynamically assigns the DNS server IP addresses (along with the ZyWALL's
WAN IP address), set the DNS server fields to get the DNS server address from the ISP.
• You can manually enter the IP addresses of other DNS servers.
680
DESCRIPTION
Use the drop-down list box to change the speed of the console port. Your
ZyWALL supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the
console port.
The Console Port Speed applies to a console port connection using terminal
emulation software and NOT the Console in the ZyWALL web configurator
Status screen.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Table 2 on page 57
ZyWALL USG 100/200 Series User's Guide
for default