Figure 138 Licensing > Registration; Table 42 Licensing > Registration - ZyXEL Communications ZyWALL USG 100 Series User Manual

Figure 138 Licensing > Registration
The following table describes the labels in this screen.
Table 42 Licensing > Registration
LABEL
General Setup
new myZyXEL.com
account
existing myZyXEL.com
account
UserName
Check
Password
Confirm Password
E-Mail Address
Country Code
Trial Service Activation
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
If you select existing myZyXEL.com account, only the User Name and
Password fields are available.
If you haven't created an account at myZyXEL.com, select this option and
configure the following fields to create an account and register your
ZyWALL.
If you already have an account at myZyXEL.com, select this option and enter
your user name and password in the fields below to register your ZyWALL.
Enter a user name for your myZyXEL.com account. The name should be
from six to 20 alphanumeric characters (and the underscore). Spaces are not
allowed.
Click this button to check with the myZyXEL.com database to verify the user
name you entered has not been used.
Enter a password of between six and 20 alphanumeric characters (and the
underscore). Spaces are not allowed.
Enter the password again for confirmation.
Enter your e-mail address. You can use up to 80 alphanumeric characters
(periods and the underscore are also allowed) without spaces.
Select your country from the drop-down box list.
Select the check box to activate a trial service subscription. The trial period
starts the day you activate the trial. After the trial expires, you can buy an
iCard and enter the license key in the Registration Service screen to
extend the service.
Chapter 8 Registration
191