Chapter 31 ADP
ADP Profile
An ADP profile is a set of traffic anomaly rules and protocol anomaly rules that you can
activate as a set and configure common log and action settings. You can apply ADP profiles to
traffic flowing from one zone to another.
Base ADP Profiles
Base ADP profiles are templates that you use to create new ADP profiles.The ZyWALL comes
with several base profiles. See
ADP Policy
An ADP policy refers to application of an ADP profile to a traffic flow.
Finding Out More
• See
Section 5.4.16 on page 122
• See
Chapter 30 on page 493
• See
Section 30.1.2 on page 493
• See
Section 31.4 on page 531
31.1.4 Before You Begin
Configure the ZyWALL's zones - see
31.2 The ADP General Screen
Click Anti-X > ADP > General. Use this screen to turn anomaly detection on or off and apply
anomaly profiles to traffic directions.
Figure 404 Anti-X > ADP > General
522
Table 173 on page 525
for details on ADP base profiles.
for ADP prerequisites
for IDP information.
for IDP-related term definitions.
for background information on these screens.
Chapter 14 on page 301
ZyWALL USG 100/200 Series User's Guide
for more information.