Table 303 System Logs - ZyXEL Communications ZyWALL USG 100 Series User Manual

Unified security gateway
Hide thumbs Also See for ZyWALL USG 100 Series:
Table of Contents

Advertisement

Table 302 Built-in Services Logs (continued)
LOG MESSAGE
Interface %s ping
check is failed. Zone
Forwarder removes DNS
servers in records.
Interface %s ping
check is disabled.
Zone Forwarder adds
DNS servers in
records.
Wizard apply DNS
server failed.
Wizard adds DNS server
%s failed because DNS
zone setting has
conflictd.
Wizard adds DNS server
%s failed because Zone
Forwarder numbers have
reached the maximum
number of 32.
Access control rules
of %s have reached the
maximum number of %u
Access control rule %u
of %s was appended.
Access control rule %u
of %s was inserted.
Access control rule %u
of %s was modified.
Access control rule %u
of %s was deleted.
Access control rule %d
of %s was moved to %d.
SNMP trap can not be
sent successfully

Table 303 System Logs

LOG MESSAGE
Port %d is up!!
Port %d is down!!
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Ping check failed, remove DNS servers from bind.
%s is interface name
Ping check disabled, add DNS servers in bind.
%s is interface name
Wizard apply DNS server failed.
Wizard apply DNS server failed because DNS zone conflicted.
%s is the IP address of the DNS server
Wizard apply DNS server fail because the device already has the
maximum number of DNS records configured.
%s is IP address of the DNS server.
The maximum number of allowable rules has been reached.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
%u is the maximum number of access control rules.
A new built-in service access control rule was appended.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was inserted successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was modified successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was removed successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
Cannot send a SNMP trap to a remote host due to network error
DESCRIPTION
When LINK is up, %d is the port number.
When LINK is down, %d is the port number.
Appendix A Log Descriptions
801

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall usg 200 series

Table of Contents