How To Set Up User Authentication Using The Radius Server; Figure 86 Object > User/Group > Group > Add; Figure 87 Object > Aaa Server > Radius > Default - ZyXEL Communications ZyWALL USG 100 Series User Manual

2 Enter the name of the group that is used in
"Finance". Then, select User/Leo and click the right arrow to move him to the Member
list. This example only has one member in this group, so click OK. Of course you could
add more members later.
Figure 86 Object > User/Group > Group > Add
3 Repeat this process to set up the remaining user groups.

6.5.3 How to Set Up User Authentication Using the RADIUS Server

This step sets up user authentication using the RADIUS server. First, configure the settings for
the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to
use the authentication method. Finally, force users to log in to the ZyWALL before it routes
traffic for them.
1 Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server, and
click Apply.
Figure 87 Object > AAA Server > RADIUS > Default
2 Click Object > Auth. method. Click the Add icon.
3 Give the new authentication method object a descriptive name, and click the Add icon.
Select group radius because the ZyWALL should use the specified RADIUS server for
authentication. Click OK.
ZyWALL USG 100/200 Series User's Guide
Table 31 on page 152. In this example, it is
Chapter 6 Tutorials
153