Chapter 7 Status
The following table describes the labels in this screen.
Table 37 Status > DHCP Table
LABEL
Interface
#
IP Address
Host Name
MAC Address
Description
Reserve
Apply
Refresh
7.2.6 The Port Statistics Screen
Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,
click Port Statistics in the Status screen.
184
DESCRIPTION
Select for which interface you want to look at the IP addresses currently assigned
to DHCP clients and the IP addresses reserved for specific MAC addresses.
This field is a sequential value, and it is not associated with a specific entry.
This field displays the IP address currently assigned to a DHCP client or reserved
for a specific MAC address.
This field displays the name used to identify this device on the network (the
computer name). The ZyWALL learns these from the DHCP client requests. You
can use CLI commands to set this value for static DHCP entries.
This field displays the MAC address to which the IP address is currently assigned
or for which the IP address is reserved.
For a static DHCP entry, the host name or the description you configured shows
here. This field is blank for dynamic DHCP entries.
If this field is selected, this entry is a static DHCP entry. The IP address is reserved
for the MAC address.
If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned
to a DHCP client.
To create a static DHCP entry using an existing dynamic DHCP entry, select this
field, and then click Apply.
To remove a static DHCP entry, clear this field, and then click Apply.
Click this to save your settings to the ZyWALL.
Click this to update the screen immediately.
ZyWALL USG 100/200 Series User's Guide