Add Interface Group - ZyXEL Communications EMG3425-Q10A User Manual

15.2.1 Add Interface Group

Click the Add button in the Interface Group screen to open the following screen. Use this screen
to create a new interface group.
Note: An interface can belong to a group only.
Figure 68 Interface Group > Add New Group
The following table describes the fields in this screen.
Table 47 Interface Group > Add New Group
LABEL
Group Name
WAN Interfaces
used in the group
Grouped LAN
Interfaces
Available LAN
Interfaces
Add
Delete
DHCP Option Rules
Chapter 15 Interface Group
DESCRIPTION
Enter a name to identify this group.
Select a WAN interface to be used in this group.
Select None to not add a WAN interface to this group.
Select a LAN or wireless LAN interface in the Available LAN Interfaces and
use the left-facing arrow to move it to the Grouped LAN Interfaces to add
the interface to this group.
To remove a LAN or wireless LAN interface from the Grouped LAN Interfaces,
use the righ-facing arrow.
Click this button to create a new rule.
Click the Delete icon to remove this rule from the EMG3425-Q10A.
EMG3425-Q10A User's Guide
115