Figure 20 Ethernet Encapsulation: Static: Finish - ZyXEL Communications ZyWALL USG 100 Series User Manual

Chapter 4 Wizard Setup
Enter the Internet access information exactly as given to you by your ISP.
WAN Interface: This is the number of the interface that will connect with your ISP.
Zone: This is the security zone to which this interface and Internet connection will belong.
IP Address: Enter your (static) public IP address.
IP Subnet Mask: Enter the subnet mask for this WAN connection's IP address.
Gateway IP Address: Enter the IP address of the router through which this WAN connection
will send traffic (the default gateway).
DNS Server: The Domain Name System (DNS) maps a domain name to an IP address and
vice versa. Enter a DNS server's IP address(es). The ZyWALL uses these (in the order you
specify here) to resolve domain names for VPN, DDNS and the time server.

Figure 20 Ethernet Encapsulation: Static: Finish

You have set up your ZyWALL to access the Internet.
If you have not already done so, you can register your ZyWALL with
myZyXEL.com and activate trials of services like IDP.
You can click Next and use the following screen to perform a basic registration (see Section
4.4 on page 93). If you want to do a more detailed registration or manage your account details,
click myZyXEL.com.
Alternatively, click Close to exit the wizard.
82
ZyWALL USG 100/200 Series User's Guide